View Full Version : Slippery Windscreen?
shining
7th August 2013, 05:39 PM
I had a new windscreen fitted a number of weeks ago by Windscreens O'Brien. In the first shower afterwards (its been a late break to the autumn dry around here) guess what? No noise. :) . I changed blades a couple of years ago to stop the "slap" at the outer extremity of the cycle but they still squeaked.
I hope its not something that wears off!
ADMIRAL
7th August 2013, 10:00 PM
Just apply Rainex regularly.  Has a similar effect.
101RRS
7th August 2013, 10:07 PM
Just apply Rainex regularly.  Has a similar effect.
Is not my experience - I have Rainex on my screen and made no difference to the noise made by new blades.
Garry
BMKal
8th August 2013, 07:49 AM
I've been using Rainex for years on many vehicles. Works well for me.
Just re-applied it in Kal last weekend, which was good timing - as it's bucketing down in Perth at the moment. I use it on all the external glass, including mirrors. I also use the Rainex additive in my washer fluid.
Because I'm "batching" it in an apartment when I'm down in Perth (and I'm basically a lazy barsteward), I've also found that Rainex on the inside of the glass shower screens and the tiles in the shower enclosure in the bathroom of the apartment works brilliantly. ;)
One thing that I have found though (some time ago on an older vehicle) - the Rainex product in the black box / bottle that you apply to the inside of the windscreen to stop internal fogging of the glass should be avoided. In my experience, it doesn't work and it leaves a horrible smear / film on the glass that takes ages and a lot of effort to get rid of (makes a similar mess on the mirror in the bathroom).
SBD4
8th August 2013, 05:43 PM
I've been using Rainex for years on many vehicles. Works well for me.
Just re-applied it in Kal last weekend, which was good timing - as it's bucketing down in Perth at the moment. I use it on all the external glass, including mirrors. I also use the Rainex additive in my washer fluid.
Because I'm "batching" it in an apartment when I'm down in Perth (and I'm basically a lazy barsteward), I've also found that Rainex on the inside of the glass shower screens and the tiles in the shower enclosure in the bathroom of the apartment works brilliantly. ;)
One thing that I have found though (some time ago on an older vehicle) - the Rainex product in the black box / bottle that you apply to the inside of the windscreen to stop internal fogging of the glass should be avoided. In my experience, it doesn't work and it leaves a horrible smear / film on the glass that takes ages and a lot of effort to get rid of (makes a similar mess on the mirror in the bathroom).
X1000 the anti fog is crap! took me a lot of elbow grease to get it off too!
shining
9th August 2013, 06:09 PM
Agreed about the internal stuff.  Tried it on the D1.  Terrible smears! I will have to get it off this weekend.
Carnut1100
11th August 2013, 07:44 AM
Rain-X good. 
Anti-fog bad!
theresanothersteve
12th August 2013, 08:20 AM
Agreed about the internal stuff.  Tried it on the D1.  Terrible smears! I will have to get it off this weekend.
I tried it a few times as was unimpressed. One time I applied it on a day when it was raining cats and dogs and it worked brilliantly. Apply it on a cold wet day and it seems to work...
 
If you get smearing you can fix the problem by applying a fine spray of plain water (filtered) and rubbing with a good quality cloth. Probably mimics doing it on a cold wet day.
 
After this process I'm not as unimpressed as I was. :)
 
But its nowhere near as good a product as the stuff for outside windows (RainX). That is brilliant (no pun intended).
Canaussie
12th August 2013, 01:07 PM
HOW TO: Super Clean Your Windshield - YouTube
Found this useful for actually applying rain x the correct way
Powered by vBulletin® Version 4.2.4 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.