PDA

View Full Version : perentie with defender single cab



tinnuts
8th August 2013, 07:35 AM
just bought a perentie at the Sydney Graysonline auction, its a bit cold in Katoomba for a soft top.
Does the roll bar prevent a cab roof from fitting and I am also looking for that cab roof.

87County
8th August 2013, 07:45 AM
just bought a perentie at the Sydney Graysonline auction, its a bit cold in Katoomba for a soft top.
Does the roll bar prevent a cab roof from fitting and I am also looking for that cab roof.

you'll have to harden up ! :D winter won't last much longer ....

A defender ute cab rear wall and roof (if you can get them ) should fit ok but I think you would have to at least trim/modify the roll bar mount at the front of the tub rail and you would obviously have to transfer the upper seat belt mount to the location on the side of the ute cab rear wall. Even A Ser2/3 rear wall may fit but I think you will need a 110 single cab roof panel to correctly fit the 110 windscreen frame.

87County
8th August 2013, 07:55 AM
By way of explanation what you will need is a rear wall similar to this series LR wall but NOT this roof

63929

Lotz-A-Landies
8th August 2013, 08:22 AM
Not sure about the ROP, I do know someone with a NOS Defender roof but you'd need the rear wall or I can provide a SIII one. I also have a NOS Defender roof lining

PM me if interested.

DeRex
22nd April 2014, 01:54 PM
Is there a possibility of obtaining the 'hard-top' cab section from a 6x6 GS model and putting this onto a Perentie soft top?

Mick_Marsh
22nd April 2014, 02:07 PM
Is there a possibility of obtaining the 'hard-top' cab section from a 6x6 GS model and putting this onto a Perentie soft top?
I doubt it. The 6x6 Perenties are a wider cab. On a wider chassis I think. There would have to be a lot of modification and an engineers report to achieve this.

303gunner
22nd April 2014, 06:14 PM
This one is currently on Gumtree:


Land Rover Defender 110 | Cars, Vans & Utes | Gumtree Australia Litchfield Area - Howard Springs | 1044282964 (http://www.gumtree.com.au/s-ad/howard-springs/cars-vans-utes/land-rover-defender-110/1044282964?utm_source=criteo&utm_medium=cpc&utm_campaign=Active-automotive&mpch=ads)


It looks they have removed at least the front portion of the ROPS.

303gunner
22nd April 2014, 06:18 PM
I doubt it. The 6x6 Perenties are a wider cab. On a wider chassis I think.
And the cab body is one piece. The roof and windscreen don't unbolt.