EAS rear drivers side only going up

[mattg]

Hi all still trying to fix my mates p38 eas I have rebuilt the valve block. Replaced the ecu the power block and RR sensor after a flat come up on the eas unlock. Fault is now gone.

The issue is the compressor does not engage itself and when I turn it on manually via the laptop the RR bag keeps going up with no movement on the front . When I Pull up on the LR guard I can lift easily and it stays up. But no lift in the front. Dash light flashes like it is trying to level out but comp does not start.

Where to from here?
Matt

[Rupert Prior]

what area are you in, anywhere close to Bexley?

[mattg]

Port Macquarie where is bexley?

[davidsonsm]

Check those non return valves. That's my advice.

[TheTree]

HI

I agree check the Non Return valves, and check the connections at the top of the springs themselves with soapy water.

Good luck

Steve

[mattg]

Where are the non return valves?

[TheTree]

Hi Mate

They are part of the EAS valve block, there are great instructions for a rebuild here

EAS Valve Block Rebuild Guide | PaulP38A.com (http://paulp38a.com/range-rover-p38/eas-valve-block-renew/)

It may also be worth reading this

EAS Troubleshooting Tips (http://www.rangerovers.net/forum/7-range-rover-mark-ii-p38/4468-eas-troubleshooting-tips.html)

Good luck
Steve