Diggers Stickers 2.0 (gathering numbers)

[Blknight.aus]

This is the initial interest thread for the second run of diggers stickers...
https://www.aulro.com/afvb/images/imported/2015/05/250.jpg

them.

It'll be 6-8 weeks minimum before I start any real progress into doing the run (If I get enough interest)

The anticipated cost is
$2.75 per sticker
$3.50 for postage

this will work in about the same way as the surplus sell of run one was done.

If you wish to order stickers simply write out


There are currently Y stickers

I would like to order X stickers.

you need to order Y+x stickers required


the Y for the beginning of your post comes from the last line of the post prior to yours.

DO NOT edit your posts if you have hit send and then later want more just add another post

DO edit your posts IF you hist send and someone else has posted between you starting typing and hitting send. Fix the mathys bit and save the changes.

If you decide you dont want the stickers just send me a PM when I put the cut off point into this post and ask for people who want to opt out to opt out.

I suggest putting a track on this thread so you dont miss the cut off, there will be a 2 week period after the cut off in which to provide payment and postage details. The run will go ahead after the cut off for payments date.

Once again I will pick up the cost of any over-run production and will then run a surplus run post. any left over will be turned over to INC for resale in the shop.(or whatever else he wants to do with them)


There are currently 0 Stickers requried

[cammac91]

There are currently 0 stickers

I would like to order 2 stickers.

you need to order 2 stickers required

[mools]

There are currently 2 stickers

I would like to order 2 stickers.

you need to order 4 stickers required

[Foxspell]

There are currently 4 stickers

I would like to order 2 stickers.

you need to order 6 stickers required

Many thanks,
Lee

[joel0407]

There are currently 6 stickers

I would like to order 2 stickers.

you need to order 8 stickers required

Happy Days

Joel

[Homestar]

There are currently 8 stickers.

I would like to order 2 stickers.

You need to order 10 stickers.

Cheers - Gav.:)

[jplambs]

There are currently 10 stickers.

I would like to order 5 stickers.

You need to order 15 stickers.

[Bearman]

Hoping you still those 2 for me Dave. (the ones you forgot to give me when you where up here in January)

[ramblingboy42]

there are currently 15 stickers
I would like to order 2 stickers
you need to order17 stickers
Dennis

[Basil135]

So, did the second run of Digger Stickers ever go ahead?

I am trying to prep the car, ready for Melrose, and can't complete the set-up without it... ;)

[Blknight.aus]

no, with a total of 17+ how ever many you wanted to order there currently isnt enough quantities to do a re-run.

From the last thread the "rights" and orignal files that were sent to the printers for the artwork I put together are communal property of AULRO under Incisors control.

If you want to hit a one off you could try asking for the file.

[Chops]

There was some interest in these from people up at Corowa last weekend. Maybe it's something that Dave can keep in his shop if he has a little cash to splash up front (?).

[tonic]

I would be interested in a couple but cant follow the thread as much as I would like. Being away with work in bad reception areas makes it difficult, but for the small amount of money that it is would be prepared to pay and wait.

[85 county]

so what is the minim run size??

[Xtreme]

I still have six of these stickers from the original run as a result of buying a bulk lot and overestimating the needs of other club members.

As it appears that some AULRO members would like to obtain these ASAP, I will make them available to the first AULRO members who PM me with their request and postage address. I will respond with payment details (Payment via EFT only). First in best dressed.

Price will be as Dave indicated in the first post ($1.75 per sticker plus $3.50 postage).

There are only six available and to be fair and allow a few to benefit from this, I will limit each request to a maximum of two stickers per member.

If anyone wishes to pickup from Normanhurst (NSW), mention this in your PM and cash payment for stickers will then be accepted.

[Blknight.aus]

From memory 50.

they then screen a run of 100 to allow for any misprints and give you the option of purchasing the overrun.The over run stickers were where all the extra stickers from the last run came from , off the top they only had one or two that didn't come out perfectly.

I've still got the email trail buried in gmail somewhere

[Xtreme]

I still have six of these stickers from the original run as a result of buying a bulk lot and overestimating the needs of other club members.

As it appears that some AULRO members would like to obtain these ASAP, I will make them available to the first AULRO members who PM me with their request and postage address. I will respond with payment details (Payment via EFT only). First in best dressed.

Price will be as Dave indicated in the first post ($1.75 per sticker plus $3.50 postage).

There are only six available and to be fair and allow a few to benefit from this, I will limit each request to a maximum of two stickers per member.

If anyone wishes to pickup from Normanhurst (NSW), mention this in your PM and cash payment for stickers will then be accepted.

All six stickers accounted for - thanks RED, Basil135, Chops and Foxspell.

Now Basil135 will be able to complete his preparation for Melrose. :D

[The ho har's]

Must get around to putting ours on our defender some time soon :D

Mrs hh:angel:

[carlschmid2002]

I am keen if there is another run. My last one went with my Defender. I gave one away. I was talking to Digger about doing a T-Shirt. I haven't done much about it as I was busy at the time. Might get some prices.

[BritishCarComponents]

Not sure if its still being considered, but we would like to stock the sticker (and the tshirt - 4 of each Mens L & XL - if it happens) at British Car Components here in North Melbourne.

Happy to purchase 20 stickers and keep them in the shop for locals to purchase whenever they need.

0% Mark Up from us, just servicing AULRO Friends and other landy lovers.

[carlschmid2002]

i would like 10

[digger]

I may be wrong but I think at one stage Tombie was looking into doing a run..

As I said Im not sure but may be worth checking? Tombie?

[Tombie]

Yes. Refining with the printer this week actually

[carlschmid2002]

Yes. Refining with the printer this week actually

Copy my 10 if available. I sold the last car with one and I gave one away. I can foresee plenty more LRs in my future.

[DT-P38]

Yes. Refining with the printer this week actually

Call me at British Car Componenets if you need to boost the run to get a better deal. Happy to carry a reasonable amount of reserve stock "for the greater good". They will sell eventually.

[Garry]

I would take 3 more

Garry

[Tombie]

OK guys...

Once we've done a pre-production run I will post here...

[Outlaw]

What are the dimensions of the stickers please as can't see it above?

[AndyG]

In ignorance, what is a Digger Sticker, it is of course possible my browser failed to show the pic

[digger]

In ignorance, what is a Digger Sticker, it is of course possible my browser failed to show the pic

It is the banner across thebase of my sig. Done in white on clear background to be mounted inside window for longevity ..well it was last time... and Blknight did all the work last time 😊

[AndyG]

Ah, of course, doh, etc
I've always admired it.

I will take two, but ive lost count of the numbers so far

The perfect bumper sticker for a car park of cruisers :twisted:

[Tombie]

No need to keep count. Plenty will be made

[newhue]

Tombie, any known eta. Just recapping outlaws Q, what size ard they.
Cheers.

[Tombie]

Heading to printers this afternoon...

Eta pending the meeting...

[Tombie]

Ok...

Just got back from the printers...

Only challenge is a white sticker! Special equipment to print a white pigment - so there will be a delay of approximately 7-10 days for white stickers...

I have got the following available now...

Dark Green
Red
Black
Blue

And white are underway shortly...

I'm unable to maintain the original price however - and will need to run them at $2.00 a sticker plus $3.50 postage (in Australia).

I will set up a poll and link to it to get the numbers and link to it here shortly...

[Basil135]

Ooohh.. Black :D

[pjw]

Pictures of the different colours please.:)

[DT-P38]

Hey Tombie,

Did you get my suggestion about scaled up versions for sill panels and/or defender vent covers?

:-)

[Tombie]

Hey Tombie,

Did you get my suggestion about scaled up versions for sill panels and/or defender vent covers?

:-)


Certainly did, and we're working on blowing them up to suit.

Artefacts in the font used means the Vector file will need tidying up for larger sizes.

But I am working on this option.

[DT-P38]

Certainly did, and we're working on blowing them up to suit. Artefacts in the font used means the Vector file will need tidying up for larger sizes. But I am working on this option. thanks mate, I will definitely be ordering for the shop and happy to order extras to boost the print run qty if it helps with keeping costs realistic. Just let me know by PM if you need that later bit to happen and when.

[komaterpillar]

Following with keen interest!!! 😁

[Tombie]

Digger sticker orders now open...

http://www.aulro.com/afvb/showthread.php?p=2366740#post2366740

Please read the whole post and reply accordingly using the system quoted...

Cheers

[Chops]

I'll wait till you've got the larger ones sorted Mike,,, I want a couple for mine :D

Or do you want the small ones just ordered first, then worry about the large ones later?

Cheers

[Outlaw]

And still waiting on dimensions of the image please

[Tombie]

Current Sticker is:
https://www.aulro.com/afvb/



Chops...

I will be sorting the larger format ones this week... Will likely be Monday-ish before I can post them up ready to run...

[Basil135]

Current Sticker is:
http://www.aulro.com/afvb/attachment.php?attachmentid=94343&stc=1&d=1432529790



Chops...

I will be sorting the larger format ones this week... Will likely be Monday-ish before I can post them up ready to run...

You sure about those measurements? :angel:

[Chops]

They're the measurements of the sticker I already have at home.
Yeah I know,,, still not on yet :angel:

[LRD414]

Tombie,

I didn't want to clutter up the thread for counting up the sticker order with questions.
Given that you stick it to the inside of window, what are your thoughts re tinted windows and visibility of the sticker?
I like the sound of green but not sure if that's feasible on tinted windows.

Scott

[The ho har's]

Another question.. We have one on our defender plus a spare. All our other vehicles are canvas roofed so a inside glass sticker won't work to well, I don't think the windscreen is a good place to put it ;) Probably it will cost extra though, just a thought :)

Mrs hh:angel:

[Tombie]

Tombie,

I didn't want to clutter up the thread for counting up the sticker order with questions.
Given that you stick it to the inside of window, what are your thoughts re tinted windows and visibility of the sticker?
I like the sound of green but not sure if that's feasible on tinted windows.

Scott


White is the most visible on tint or even on clear glass...

The red may be ok on average tint, it's certainly useless on mine...

[Tombie]

Another question.. We have one on our defender plus a spare. All our other vehicles are canvas roofed so a inside glass sticker won't work to well, I don't think the windscreen is a good place to put it ;) Probably it will cost extra though, just a thought :)



Mrs hh:angel:


I can flip a few if you like (external fit) but they won't weather as well unless they're laminated.

Or the next version will be a vinyl and larger - they should work ok..

[digger]

Certainly did, and we're working on blowing them up to suit.

Artefacts in the font used means the Vector file will need tidying up for larger sizes.

But I am working on this option.

what kind of Dr Who speak is that????

I speak english, some pitjantjatjara words, some greek , I am almost fluent in drunk but I have no idea what language that was, Im reading in english if it helps.... :twisted:

I will use google translate and see if that helps...

here's what it says...
"the picture will be fuzzy if you blow it up and dont clean it up first"

[Blknight.aus]

what kind of Dr Who speak is that????

I speak english, some pitjantjatjara words, some greek , I am almost fluent in drunk but I have no idea what language that was, Im reading in english if it helps.... :twisted:

I will use google translate and see if that helps...

here's what it says...
"the picture will be fuzzy if you blow it up and dont clean it up first"



what it really means is...

"the lazy bugger who did it the first time only did the work to suit the resolution and capabilities of the machine for the sizes that were being done on the first trun with no effort made to accomodate other sizes or equipment."

[85 county]

what kind of Dr Who speak is that????

I speak english, some pitjantjatjara words, some greek , I am almost fluent in drunk but I have no idea what language that was, Im reading in english if it helps.... :twisted:

I will use google translate and see if that helps...

here's what it says...
"the picture will be fuzzy if you blow it up and dont clean it up first"


lol make them bigger and they look like what you leave in the loo