Turbo fitting measurements for isuzutoo-eh

[flagg]

Not sure if this is exactly what you needed, let me know if not. The bottom of the ruler is about the same height as the T25 mount face - maybe a couple of mm out max.

This is with the flat type turbo manifold. I can fit the EFR Turbo in with the regular bonnet, but not the WTA. The outlet can be moved around the axis of the turbo, so technically you could havhttps://www.aulro.com/afvb/e it facing down or to the side and have it routed via a FMIC or under the air filter.

http://www.aulro.com/afvb/attachment.php?attachmentid=65899&stc=1&d=1379752588

[isuzutoo-eh]

Thanks mate! I'll be able to measure up my turbo and see if it'll fit easily enough. Much appreciated.
BTW for anyone interested an way to measure clearence under the bonnet is to make a cone of al foil, shut the bonnet, open it and measure how flat your cone becomes.

[Bush65]

I was always tought that that is a rule, and Queen Elizabeth is our only ruler ;)

Good tip re the al foil.

[flagg]

I was always tought that that is a rule, and Queen Elizabeth is our only ruler ;)

:wasntme:


BTW for anyone interested an way to measure clearence under the bonnet is to make a cone of al foil, shut the bonnet, open it and measure how flat your cone becomes.


Great idea about the foil !! (I'll use one of these hats I have laying around)

[rar110]

Thanks mate! I'll be able to measure up my turbo and see if it'll fit easily enough. Much appreciated. BTW for anyone interested an way to measure clearence under the bonnet is to make a cone of al foil, shut the bonnet, open it and measure how flat your cone becomes.

I use a rolled up bit of blue-tack.