View Full Version : Drivers Seat
Hardynice
26th September 2013, 09:02 PM
Could anybody tell me if a drivers seat out of a series 2 discovery will bolt straight into a series 1 or are the bolt holes at a different location :confused::confused:
shorty943
27th September 2013, 08:58 AM
Could anybody tell me if a drivers seat out of a series 2 discovery will bolt straight into a series 1 or are the bolt holes at a different location :confused::confused:
3 door or 5 door?
According to the manual for my 3 door, the entire floor section is different.
5 door has the same sort of box affair that the old series models have, where my 3 door is flat floored with tubular risers holding the seats.
UncleHo
27th September 2013, 04:30 PM
I would say that they would be interchangeable as the 95-on D1 is basically the same as the D2 pre facelift.just depends on the trim level and airbag setup.
Utemad
27th September 2013, 08:44 PM
MY97 & MY98 maybe but MY95 & MY96 and earlier have the old style seat box bolted to the floor and seat belts bolted to the pillar and transmission tunnel.
Powered by vBulletin® Version 4.2.4 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.