Help with a Part identification

[SII Josh]

Hi all,

i have attached a photo of what i believe to be the hand brake relay lever

My question is, is it a hand brake relay lever and have i fitted it in the right spot? :)

the reason i ask is i had to remove the fuel tank to fit it and now the tank is hard up against the bolt heads.

cheers for your wisdom in advance :)

[Dinty]

Yes it is the relay lever for the handbrake and it is also in the right position. What Land Rover ? have you got is it a 88" or 109", here is an image of one of my 88" showing the handbrake relay shaft in position relative to the bottom of the standard fuel tank
http://i659.photobucket.com/albums/uu319/DJM110/IMG_1969_zpse441461e.jpg
as you can see the hexagon heads of the 4" x 3/8"UNF bolts clear the std fuel tank, is your tank a std 45lt or did you have a larger tank made?, by the way nice clean chassis/paint job good work cheers Dennis:angel:

[Sitec]

Looks right to me... That also looks like a very clean rebuild. Impressive work!!

[SII Josh]

Thanks for helping out with the ID of the part, good to know i got it in the right place first go. just got to look into why its hitting the bolt heads now, as far as i know it is the standard fuel tank..

Thanks for the kind words regarding the the re-build, in the photo you can see the battery support in the top left corner, it was welded on tonight by a friend so more painting tomorrow :)

[SII Josh]

here is the battery stand welded back on, ready for painting in the morning :)

[SII Josh]

And here is the battery stand all painted

[John H]

Nice looking work there.

[russellrovers]

And here is the battery stand all painted
hi josh top rail to under side of b box is 120 mm approx regards jim