PDA

View Full Version : door problem



warnie100
26th October 2013, 07:29 AM
hi guys I have an annoying problem with our passenger door it locks ok un locks with central locking but when you pull on the handle to open it the button falls down ever so slightly and wont allow you to open unless it is held up any ideas please:(

OlliesLRover
26th October 2013, 07:57 AM
have a look at this post, it sounds similar to yours

http://www.aulro.com/afvb/discovery-1/97913-door-latch-spring.html

warnie100
26th October 2013, 10:43 AM
thanks for that link sounds exactly the sam ei shall source some springs thanks again

OlliesLRover
26th October 2013, 04:55 PM
thanks for that link sounds exactly the sam ei shall source some springs thanks again

This mob in Sydney might be worth a call/email if you have problems sourcing some plus they do postage.
Karcraft | Sydney Auto Spare Parts | Land Rover, Mini, BMW, Rover, Jaguar (http://www.karcraft.com.au/index.php)

The part number according to the link I gave you is, part no MTC9505 Door Lock Mechanism Link Spring only.

May also pay to get some spare door trim clips part no:MWC9134 <C> as they tend to break easily when taking off the door trim.

Rich

waltsd
27th October 2013, 11:17 AM
Common problem with spring broken. Back doors are easy to access the locks, but front door was a pain in the .... to get to the lock itself. Have to take the mirror off and window frame held up out the way to access. So just allow some time to do it and follow the instructions, from Haynes or other, not to miss a step.:)

Dave