Puma 2 inch lift issues

[dcale]

Hi, guys was looking for some advice regarding a 2 inch lift on a Puma. I have just fitted a TF209 kit and took it for drive last weekend. In short my rear springs dislocated and my sway bar inverted.
Initial enquiries about the lift was that I would not need dislocation cones or something to realign the sway bar.
So I guess I now need cones, but my question is what do I do about the sway bar, as I am struggling to find any solutions?
Thanks in advance
Darren

[POD]

You could do what I have done with both my sway bars. Take them off and hang them up in the shed.

[MLD]

If money is no object, consider the X-Engineering sway bar solution.

X Deflex Anti Roll Bar for Land Rover Defender, Discovery & RR Classic (With 30mm Spacer) (http://foundry4x4.co.uk/index.php?route=product/product&path=65_1759&product_id=77)

Don't know anyone that has one fitted but i recall a post on AULRO offering feedback.

MLD

[doogs]

arb do a suspension kit and it has 25mm spacers for the sway bars
might be able to get the spacers separately tho as the lift kit is no good for a puma