BST4X4XFA
9th November 2013, 11:05 PM
Had to replace the Serpentine Belt tensioner a week ago, also did the belt. The idler pulley and Aircon pump bearings was done with in the last 12 months.
There is now a infrequent squeak noise at idle, it's not the belt squeal. It gets worse if the Aircon is switched on. As soon as the revs pick up the noise goes away. With the belt off the Aircon pump does make a little noise when spun by hand. The water pump/ power steering pulley does not make any sound but when spun forwards and backwards there is a clunking noise as you change direction.
The other thing I noticed is that the tensioner bounce around at idle but as soon as the revs pick up just a little it stops and remain steady.
Has anybody experienced something simular that can shed some light on the issue for me?
Cheers, Jurgens.
There is now a infrequent squeak noise at idle, it's not the belt squeal. It gets worse if the Aircon is switched on. As soon as the revs pick up the noise goes away. With the belt off the Aircon pump does make a little noise when spun by hand. The water pump/ power steering pulley does not make any sound but when spun forwards and backwards there is a clunking noise as you change direction.
The other thing I noticed is that the tensioner bounce around at idle but as soon as the revs pick up just a little it stops and remain steady.
Has anybody experienced something simular that can shed some light on the issue for me?
Cheers, Jurgens.