PDA

View Full Version : Stainless bore clutch master cylinder?


Dan346
4th January 2014, 03:25 PM
Im chasing the details for a chap in QLD who does a modified 1" clutch master cylinder, specifically with a stainless bore? its for a 300tdi defender.

I do remember seeing his details around 12 months ago when mine originally went, but then deciding i needed it the next day i ordered a ****part™ one instead. Fast forward 12 months and ill just go with "lesson learned" :censored:

I have tried searching but it wasnt successfull, hence the post.

The only other hint i can give is i believe his first name was Bill or Bob or maybe even BillyBob?

Cheers,
Dan
steveG
4th January 2014, 06:43 PM
Cant help with the bloke you are chasing, but it would be more common for a master cylinder to be stainless sleeved rather than chromed.
Any decent clutch/brake place should be able to help you with that.

Steve
Dan346
5th January 2014, 07:09 AM
i was tossing up wether it was stainless or chrome lol, If its a fairly common mod i may be able to find another supplier. Cheers
Blknight.aus
5th January 2014, 07:38 AM
places that do marine trailers sometimes carry stainless sleeved M/C's.

usually they are a direct bolt up fit.
gromit
5th January 2014, 08:23 AM
Most brake places can get your old one re-sleeved.
Fred Smith Landrovers in Bayswater, VIC used to carry them in stock. He got a standard cheapy and sent it away for re-sleeving. The only part you had to use from your original was the pushrod.
Cost was about $120 last time I got one.


Colin
Offender90
5th January 2014, 08:39 AM
I got one from Fred Smith several months ago - he still does them and they're still $120 + postage.
HTH
Bojan
Dan346
5th January 2014, 10:00 AM
Awesome, Thanks guys. Ill give Fred a call on monday.
Bigbjorn
5th January 2014, 05:54 PM
Master Cylinder Exchange Service at Wynnum. Been trading in these for yonks.
ted44
5th January 2014, 06:19 PM
Where about's in Wynnum is this exchange place Cheers?
rar110
5th January 2014, 08:30 PM
Master Cylinder Exchange Service at Wynnum. Been trading in these for yonks. After 2 attempts at supplying a PBR MC that didn't leak and left with a MC that leaked after 4 mths into the booster and stuffed that as well I won't be going back there.

Shame I understand they had a good reputation.
Bigbjorn
5th January 2014, 08:31 PM
Where about's in Wynnum is this exchange place Cheers?

Glenora St. between the rail line and Tingal Road.