Puma drawer measurements with cargo barrier

[drzzt]

Hi,

Just putting together measurements for the drawers and trying to figure out where the cargo barrier goes to. I'm thinking a Milford cargo barrier and not sure how deep to put the drawers. I'm going off povman's design(thanks dude). Any measurements would be good. Also, what did people do with the cargo tiedowns? I would going to use them to strap down the lid, but did anyone use them to bolt down the drawers?

Cheers,
Chris

[n plus one]

Hi,

Just putting together measurements for the drawers and trying to figure out where the cargo barrier goes to. I'm thinking a Milford cargo barrier and not sure how deep to put the drawers. I'm going off povman's design(thanks dude). Any measurements would be good. Also, what did people do with the cargo tiedowns? I would going to use them to strap down the lid, but did anyone use them to bolt down the drawers?

Cheers,
Chris

I'll flick some measurements up in the morning - a few too many rums to be relied on now...

[n plus one]

It's 980mm from the rear if my cargo drawers to the rear edge of the cargo barrier at a height 250mm up from the floor of the cargo bay. The barrier slopes rearward until its 480mm up from the floor (or 240mm up from the drawer platform) and then heads straight up to the roof. At the top of the barrier it's 930mm forward of the rear windo surround trim.

It's a Blackwidow drawer system and compatible barrier and leaves (just) enough space for a 50l slim line water tank between the barrier and the rear seats.