Maxidrive diff lock and axles

[Andrew Morris]

I am interested in the diff lock component of this but have no use for the axles.

Is there anyone interested in the axles? As well as sharing cost, i would very much like to not freight the entire assembly if I was to win the auction?

If so, could you send a PM please

Andrew

[Bearman]

What diff do they fit Andrew?, you forgot to mention.

[Andrew Morris]

Not sure. I have put a question to seller.

I am only interested if it's 24 spline.

Will,keep you posted.

[CTY90]

Hey Mate,
If you want to use the diff as a locking one, you need the axles, (well at least the long side) as this axle has longer splines at the diff end for the collar ,which engages the diff lock, to slide along. And then if you are running 1 maxi axle, there is not much point rinning 1 standard axle (IMO anyway)
Also, depending on the age of the maxi locker, it may be a 28 spline.
See on the RHS axle in the pic the red collar around the axle and the extended splines on the axle.


Hope this helps.
Cheers.
Rich.
https://www.aulro.com/afvb/images/imported/2014/02/1164.jpg

[Andrew Morris]

Whoops, forgot to put the link

http://r.ebay.com/S9sbKU

What I have is a series with a 3.54 diff. I have some seriestrek axles which are 24 spline.

If the axles are needed for the locker, then it won't work because the axles will be too long.

Thanks anyway

Andrew