PDA

View Full Version : Defender tdi dash/blower - Aircon vs non aircon



ScottW
6th February 2014, 08:47 AM
I'm chasing a defender dash to install into my County as part of the air-vent conversion which I have been comtemplating for 3 years now. There is defender not too far away being wrecked which is a 300 tdi with aircon.

https://www.aulro.com/afvb/images/imported/2014/02/1010.jpg

From the pics of the dash, it looks like the aircon part is in the bottom black bit of the dash. Would the rest of the dash (ie the green part up) be suitable to use in the county, including the heater/demister control panel and I guess the heater/demister pipework as well? Basically everything but the gauges.

Secondly, is the heater/blower different between the aircon and non-aircon tdi's? I'm assuming these are different and I'll need a non-aircon blower set-up.

Can anyone help me out here?

Cheers
Scott

frantic
6th February 2014, 09:12 AM
In my 02 td5 the air con controls and vents are at knee height whereas the heater for the windscreen vents is controlled by 2 levers On the right side of the Speedo for hot or normal / outside or recirculation (similar to my old SIII swb88)and a level On the left of the dash tachometer controls fan speed. So I would assume the venting is separate as when the air con is on no cold air goes to windscreen.
This could be useless if they vented the tdi differently but One I test drove years ago looked the same from memory.

uninformed
6th February 2014, 12:30 PM
The vent blower/heater on a 300tdi is completely separate to the A/C. The vent blower/heater is factory LR. The A/C were installed here in oz.

VladTepes
6th February 2014, 12:54 PM
Yep, what serg said !

ScottW
6th February 2014, 02:50 PM
Sweet. I'll see if the wrecker still has the bits.

ScottW
6th February 2014, 04:45 PM
I just rung the wrecker and he sounds like a bit of a clown. Wouldn't give me a price for any parts. Wants me to drive to his wrecking yard and discuss it in person. Since it's an hour and a half away, and the prices he's listed on fleabay for some parts seem a little on the high side (or a lot) he's setting me up to get stung...

Hopefully I have more luck with British offroad. There aren't many defenders being wrecked privately around here.

uninformed
6th February 2014, 04:56 PM
I feel your pain. Bugger all comes up around here. BOR will most probably have what you need, but will want top $$$ for it thats for sure.

County3.9
8th February 2014, 10:47 PM
I did this conversion to my county a few years ago, best thing I ever did. It all just bolts on, go for it.

ScottW
10th February 2014, 08:15 AM
Were you able to re-use the County heater controller, or did you install the defender controls instead?

I still haven't got the grey dash part, so that's the biggest hold up for me.

steveG
10th February 2014, 08:37 AM
My County has the defender dash and flaps. It also has a series III heater box and blower rather than the defender ones.
All fitted by the PO so not sure what was involved in doing it.

Steve

ScottW
10th February 2014, 09:51 AM
My County has the defender dash and flaps. It also has a series III heater box and blower rather than the defender ones.


Interesting. I have a series heater box and blower already, although I think the heater matrix has a leak. I might have to pull the County heater out and have a look.