Radio Tables Wanted

[HowardSmall]

If anyone is discarding radio tables from their Perentie please don't put them on the scrap heap. I am after some for my S2A and a mate needs some for his Perentie FFR.


Thanks, Howard

[oowa]

If anyone is discarding radio tables from their Perentie please don't put them on the scrap heap. I am after some for my S2A and a mate needs some for his Perentie FFR.


Thanks, Howard


http://img.photobucket.com/albums/v602/amvcs_nsw/1620140_10151962622493581_23406814_n.jpg


http://img.photobucket.com/albums/v602/amvcs_nsw/1654492_10151962623123581_1589146776_n.jpg


I have these that I am taking to Corowa to seel next month to sell

[Lotz-A-Landies]

If anyone is discarding radio tables from their Perentie please don't put them on the scrap heap. I am after some for my S2A and a mate needs some for his Perentie FFR.


Thanks, HowardHoward

Did SIIa have the SIII/Perentie type tables?

AFAIK they are being removed prior to sale.

If you want to make some I have attached a drawing of them.

[HowardSmall]

Thanks for the info.


No, they did not use them on S2A - the large Larkspur table was used. I had one of them with a C11/R210 plus a T1155 aircraft radio (if I recall the model correctly) so my FFR was as used in service. However that was too bulky, too heavy and not much use on the amateur bands so I moved that on.


I then set up a wooden platform with a German SEM35 for VHF and a PRC319 for HF. Sadly I needed some money so had to let the PRC319 go.


Also had a Raven RT-F200 but it followed the PRC319...


Now figure I will mount the SEM35 on a smaller table and later see what I can do for HF.


Howard





Howard

Did SIIa have the SIII/Perentie type tables?

AFAIK they are being removed prior to sale.

If you want to make some I have attached a drawing of them.