PDA

View Full Version : Tow bar for 130



Landy86
17th February 2014, 09:34 PM
Hi guys
I've just got a new 130 hcpu and was wondering if a standard tow bar will fit it or is there a special one I need

Benz
17th February 2014, 10:00 PM
I think it is possible to get one that sticks out further to clear the overhanging tub.

A very handy feature.

The standard 110 one will fit but it might be a pain to hook up your trailer with.

Hayman reese make such a tow bar

camel_landy
18th February 2014, 02:43 AM
As previously mentioned, there's an extender you need to fit to the rear crossmember for the tow bar on a 130.

M

newhue
18th February 2014, 05:59 AM
on the other hand I sold my 130 tow bar as it dragged too much. I put a 110 on and bought an extended hitch which puts the ball near the end of the tray.
Good for 2.5T so drop a bit in tow capacity, but all my towing is under 1T.

Landy86
18th February 2014, 09:12 AM
Thanks for that guys

MLD
18th February 2014, 10:05 AM
Good to know Jason, I plan to do the same with my 130, that is, bolt on my tow bar from the 110 to gain about 75mm in clearance. As for the reduced tow capacity. Is that because the bar is rated less (i thought the 110 was 3,500t too) or the extended tow hitch?

MLD

newhue
18th February 2014, 10:42 AM
Good to know Jason, I plan to do the same with my 130, that is, bolt on my tow bar from the 110 to gain about 75mm in clearance. As for the reduced tow capacity. Is that because the bar is rated less (i thought the 110 was 3,500t too) or the extended tow hitch?

MLD

The extended hitch.