Intermediate Gear Bearings

[B.S.F.]

While looking through my stuff I found these. They appear to fit a shaft about 1 and 5/8 ''. I've only got S1 and 2 shafts which are smaller. Any idea what they fit ? They appear to be in useable condition. .W.

[gromit]

While looking through my stuff I found these. They appear to fit a shaft about 1 and 5/8 ''. I've only got S1 and 2 shafts which are smaller. Any idea what they fit ? They appear to be in useable condition. .W.

Series 3 have a bigger diameter intermediate shaft.
Usually they are plastic caged so I guess yours are older and/or OEM ?

Colin

[Dinty]

Series 2A & S3 have the larger diameter intermediate shaft, cheers Dennis

[JDNSW]

The change was during Series 2A production between chassis suffix A and B. (But since the boxes are interchangeable from 1950 to end Series 3 production, check what you actually have!)

John

[B.S.F.]

Thank you for your replies. I'd better hang on to them then. One never knows, do one? .W.

[Blknight.aus]

they are later 2A and 3 bearings, later three bearings had a plastic cage,

pack em in grease, put em in a bit of PVC pipe and cap both ends with a label affixed.