Log in

View Full Version : headlights



spitzstick
14th April 2014, 08:30 PM
Hi
I would like the the headlights on my 2013 fl2 to project a little further down the road; will someone kindly tell me how to adjust them?
Thanks in advance
Roger

mikehzz
14th April 2014, 09:34 PM
On my 08 model there is a dial to the right of the headlight switch that adjusts them up and down.

spitzstick
14th April 2014, 10:16 PM
Hi
I am aware of that.
It's the lamp it's self that i would like to adjust.
roger

discojools
15th April 2014, 06:55 AM
I'm with you Roger.. The headlights on my MY14 are hopeless especially on high beam. They seem to light the side s of the road and not the middle.

I have asked my dealer if Xenons are retrofittable but not possible apparently.

Jools

BigJon
15th April 2014, 01:01 PM
I found the headlights fitted to my MY07 Vogue a bit disappointing, even though they are xenon. I found the cure was this:

FYRLYT DRIVING LIGHTS (http://fyrlyt.com/)

discojools
15th April 2014, 02:44 PM
Yeah know about those lights. They're rippers! Unfortunately no way of fitting them to the front of the Freelander. Even LR don't have their now driving lights available for the Freelander.

Jools

mikehzz
15th April 2014, 05:20 PM
Mine's got an X Bar that will hold a couple of driving lights.

freemander
15th April 2014, 06:49 PM
Can't comment about your lights but my xenons are brilliant, both low and high beam.

BigJon
18th April 2014, 12:20 PM
Yeah know about those lights. They're rippers! Unfortunately no way of fitting them to the front of the Freelander. Even LR don't have their now driving lights available for the Freelander.

Jools

There is always a way. I custom made the mounts on my Vogue. Lights are nice and solid (no vibration) and if I remove the mounts you would never know they had been there.

discojools
19th April 2014, 01:04 PM
BigJon,
I'll have a better look around the front of the Freeloader to see if there is indeed a way of fitting some lights!

Jools.