towe0609
21st April 2014, 07:07 PM
Howdy
I recently acquired a 1997 130. It has a flat tray fitted, but I was also supplied the original tub, frame and canvas.
I'm thinking I'll re-install the tub, but it was stripped of its lights and these need to be replaced.
What lights do I need to re-create the light panels ... I'm happy to just use cheap aftermarket lights to get this done.
Using this ....
http://www.aulro.com/afvb/attachments/90-110-130-defender-county/74119d1394611985-130-rear-tub-setup-finished-020.jpg
I've searched the paddocks catalog, and come up with this list of parts .... Is this what I need?
2 x AMR6515 Rear Indicator - complete - 12v from 95MY - MA
AMR6515 | Rear Indicator - complete - 12v from 95MY - MA (http://www.paddockspares.com/amr6515-rear-indicator-complete-12v-from-95my-ma.html)
2 x XFD100100 Rear light unit - red - 12v from 95MY - MA
XFD100100 | Rear light unit - red - 12v from 95MY - MA (http://www.paddockspares.com/xfd100100-rear-light-unit-red-12v-from-95my-ma.html)
1 x XFE500010 Fog light round unit - from 1A612404
XFE500010 | Fog light round unit - from 1A612404 (http://www.paddockspares.com/xfe500010-fog-light-round-unit-from-1a612404.html)
1 x XFD500010 Reverse light round unit - from 1A612404
XFD500010 | Reverse light round unit - from 1A612404 (http://www.paddockspares.com/xfd500010-reverse-light-round-unit-from-1a612404.html)
Which is the tail light(s), and which is the brake light(s)?
Is there some sort of wiring harness that brings all this together?
The plate the lights are fitted to is also missing. Can this be purchased, or will I have to knock something up? How do these lights fix to the panel?
The box that protects the fuel filler has been removed. I've got the box, but the seal is stuffed. Can I purchase this seal anywhere?
Cheers, Tim.
I recently acquired a 1997 130. It has a flat tray fitted, but I was also supplied the original tub, frame and canvas.
I'm thinking I'll re-install the tub, but it was stripped of its lights and these need to be replaced.
What lights do I need to re-create the light panels ... I'm happy to just use cheap aftermarket lights to get this done.
Using this ....
http://www.aulro.com/afvb/attachments/90-110-130-defender-county/74119d1394611985-130-rear-tub-setup-finished-020.jpg
I've searched the paddocks catalog, and come up with this list of parts .... Is this what I need?
2 x AMR6515 Rear Indicator - complete - 12v from 95MY - MA
AMR6515 | Rear Indicator - complete - 12v from 95MY - MA (http://www.paddockspares.com/amr6515-rear-indicator-complete-12v-from-95my-ma.html)
2 x XFD100100 Rear light unit - red - 12v from 95MY - MA
XFD100100 | Rear light unit - red - 12v from 95MY - MA (http://www.paddockspares.com/xfd100100-rear-light-unit-red-12v-from-95my-ma.html)
1 x XFE500010 Fog light round unit - from 1A612404
XFE500010 | Fog light round unit - from 1A612404 (http://www.paddockspares.com/xfe500010-fog-light-round-unit-from-1a612404.html)
1 x XFD500010 Reverse light round unit - from 1A612404
XFD500010 | Reverse light round unit - from 1A612404 (http://www.paddockspares.com/xfd500010-reverse-light-round-unit-from-1a612404.html)
Which is the tail light(s), and which is the brake light(s)?
Is there some sort of wiring harness that brings all this together?
The plate the lights are fitted to is also missing. Can this be purchased, or will I have to knock something up? How do these lights fix to the panel?
The box that protects the fuel filler has been removed. I've got the box, but the seal is stuffed. Can I purchase this seal anywhere?
Cheers, Tim.