View Full Version : Where is the SRS airbag in my Defender? ARB please explain...
FeatherWeightDriver
1st May 2014, 01:02 PM
A picture is worth a thousand words... ;)
https://www.aulro.com/afvb/images/imported/2014/05/1319.jpg
Tombie
1st May 2014, 01:35 PM
Generic sticker... And clearly marked with the words: For vehicles fitted with SRS Airbags
Being as observant as you are, you have noticed that the vehicle in question lacks the aforementioned feature and therefore doesn't need to worry about the later notice.
FeatherWeightDriver
1st May 2014, 02:06 PM
Or are they saying the bar is for vehicles with SRS airbags? :D
I will resist all temptation to:
return the bar, as it is for an airbag vehicle that I don't own. Easy win due to the false and misleading claim of the label ;)
return the Defender, as I forgot to tick the airbag option
PS: both of my posts above should be in Sarcastica font...
Tombie
1st May 2014, 02:08 PM
You're messing your grammar/punctuation up.
It does not state it is FOR vehicles with airbags.
Your humour is dry (I like it)
85 county
1st May 2014, 02:20 PM
how can it be for a defender and a county?
the bolt holes are in difrent places
Tombie
1st May 2014, 02:21 PM
Because County is a trim spec, and was still offered in some markets :)
85 county
1st May 2014, 02:37 PM
Because County is a trim spec, and was still offered in some markets :)
ah true
FeatherWeightDriver
1st May 2014, 02:44 PM
But it DOES say "for vehicles equipped with SRS airbags" :wasntme:
Someone with better grammar analysis than me can probably decode the nouns, adjectives and verbs Parse a sentence (http://www.link.cs.cmu.edu/link/submit-sentence-4.html)
They likely suit Defender vs County via different mounting brackets and/or the way the mounts are installed.
The mounting brackets are separate to the bar. You bolt the brackets to the chassis, and the bar to the brackets.
Looks like you also need to drill additional holes in both the bracket (to match the existing chassis holes) and the chassis (to fit the mounting bracket holes) for full and final fitment.
85 county
1st May 2014, 03:50 PM
But it DOES say "for vehicles equipped with SRS airbags" :wasntme:
Someone with better grammar analysis than me can probably decode the nouns, adjectives and verbs Parse a sentence (http://www.link.cs.cmu.edu/link/submit-sentence-4.html)
They likely suit Defender vs County via different mounting brackets and/or the way the mounts are installed.
The mounting brackets are separate to the bar. You bolt the brackets to the chassis, and the bar to the brackets.
Looks like you also need to drill additional holes in both the bracket (to match the existing chassis holes) and the chassis (to fit the mounting bracket holes) for full and final fitment.
only srs have separate mounting brackets. squiggly things so the srs will work. not allowed to drill holes in it ether. apart from early td5s. all the other bars were one peace
85 county
1st May 2014, 03:51 PM
Because County is a trim spec, and was still offered in some markets :)
so how do you fit a bull bar to a couple of peaces of carpet and a sticker?:D:D
Powered by vBulletin® Version 4.2.4 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.