Perentie Door Lock Installaton

[DeeJay]

I thought I would post up a quick tutorial in case anyone thinks this is a difficult job. Its dead easy. Posting this tutorial will take twice as long ;)


First, buy a set of 3 barrels& matching keys I got mine from British Off Road in Montrose here in Vic because I can collect - for $29.00 but there are plenty on Ebay.


First. remove the rubber lock Grommet with a flat screwdriver.


https://www.aulro.com/afvb/images/imported/2014/05/941.jpg


Then bend back the internal door locking tab with the same screwdriver.


https://www.aulro.com/afvb/images/imported/2014/05/942.jpg


This will reveal a small Phillips head screw. Remove this.

https://www.aulro.com/afvb/images/imported/2014/05/943.jpg

Then use the screwdriver to centralise the tab so it moves freely

https://www.aulro.com/afvb/images/imported/2014/05/944.jpg

It will then slide up to lock the door internally.

https://www.aulro.com/afvb/images/imported/2014/05/945.jpg

Then simply insert the lock mechanism which will self lock in place

https://www.aulro.com/afvb/images/imported/2014/05/946.jpg
https://www.aulro.com/afvb/images/imported/2014/05/947.jpg
The ignition barrel was covered by Spudboy earlier but to save searching --

Get a right angle thingamajig or maybe a small alen key will do & depress a hidden lug ( as per picture) & wiggle out the blank & insert the keyed barrel with the lug upwards. It will also self locate.
https://www.aulro.com/afvb/images/imported/2014/05/948.jpg
https://www.aulro.com/afvb/images/imported/2014/05/949.jpg
Job done :)
David

[rangieman]

Well done dave are all the keys matched or is like the series & def set up separate keys for door and ign:cool:

[DeeJay]

Hey Chris, All 6 keys are the same, so they can't be genuine Land Rover:p