Accessory plug

[bob2s]

Hi Guys,
Have a question regarding the 12 volt accessory plugs in MY13 D4.I would like to plug a work light into one of the plugs with out it switching off when the system goes to sleep. Is there a way of getting around this so that i do not have to have the ignition on all the time.

Bob

[Torero22]

Hi Guys,
Have a question regarding the 12 volt accessory plugs in MY13 D4.I would like to plug a work light into one of the plugs with out it switching off when the system goes to sleep. Is there a way of getting around this so that i do not have to have the ignition on all the time.

Bob

Yes - some options:
1) make up a cable that you clamp directly to the battery.
2) install separate circuit from the battery, ideally via a switch and fuse.

[Graeme]

If the wiring is the same as all preceding D3s & D4s then replacing the appropriate relay with a jumper fitted with 2 spade terminals will do the trick.

[bob2s]

Thanks Graeme for that but next question is where is the relay located,any help in this would be appreciated.Another thing is,would this be compatible with a dual battery kit if i were to fit one

Bob

[rufusking]

Have a read through this thread.

http://www.aulro.com/afvb/d3-d4-rrs/171694-discovery-4-2013-rear-seat-cargo-boot-space-permanent-dc-power.html