Torero22
12th May 2014, 05:34 PM
Thinking of using the following camera, in black & PAL, for reversing mounted where the factory fitted unit would be normally fitted.
Mirror Switcher Metal Design Front Side Rear View HD CCD Car Backup Camera | eBay (http://www.ebay.com/itm/121198720765'ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649)
Back up plan is to use this one
CCD 360°CAR Front Side Rear View Reverse Camera FOR ALL Brand NEW Good Quality | eBay (http://www.ebay.com.au/itm/271416146993'ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649)
The reversing camera will be connected to the reversing input of my new Sound system - pioneer.
The side and camper cameras will be connected to the Camera system I bought - see below next post.
The second camera unit above will be installed on each side mirror. Depending on visibility I may put two on each side, On the mirror - to get full length visibility.
Back to the reversing camera:
I have seen the other units that replace one of the Number plate lights, but don't really like those.
I have seen someone place a camera above the top door, But I don't want to drill through metal.
Anyone else used the factory mount on the rear door & what camera did you use ?
Regards
Tor
Mirror Switcher Metal Design Front Side Rear View HD CCD Car Backup Camera | eBay (http://www.ebay.com/itm/121198720765'ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649)
Back up plan is to use this one
CCD 360°CAR Front Side Rear View Reverse Camera FOR ALL Brand NEW Good Quality | eBay (http://www.ebay.com.au/itm/271416146993'ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649)
The reversing camera will be connected to the reversing input of my new Sound system - pioneer.
The side and camper cameras will be connected to the Camera system I bought - see below next post.
The second camera unit above will be installed on each side mirror. Depending on visibility I may put two on each side, On the mirror - to get full length visibility.
Back to the reversing camera:
I have seen the other units that replace one of the Number plate lights, but don't really like those.
I have seen someone place a camera above the top door, But I don't want to drill through metal.
Anyone else used the factory mount on the rear door & what camera did you use ?
Regards
Tor