View Full Version : Gwyn Lewis Shock Mounts on Puma
chook73
13th May 2014, 03:16 PM
Has anyone fitted the Gwyn Lewis dual position rear shock mounts to a puma? If so what did you do with the fuel filter?
MLD
13th May 2014, 03:57 PM
Hi Iain,  I have the 3 position mount and the fuel spacer.  I have the shock in the centre location and there is a country mile of clearance to the fuel filter even if the filter spacer was absent.  For the cost of the filter spacer (given the money already invested) it's safer to buy and not want than to want and not have.  The spacer simply moved the filter out an inch from the chassis to clear the shock pin in the third or forward position.
Gwyn will know for sure
MLD
LowRanger
13th May 2014, 04:28 PM
Hi Iain
We fitted a Gwyn Lewis fuel filter adaptor to Brendans 130 and it moved the filter forward enough to clear the shock mount after loosening the fuel lines to the tank to give enough slack in the lines.Still added a piece of rubber around the fuel lines for added protection.
chook73
13th May 2014, 06:05 PM
Hi Iain
We fitted a Gwyn Lewis fuel filter adaptor to Brendans 130 and it moved the filter forward enough to clear the shock mount after loosening the fuel lines to the tank to give enough slack in the lines.Still added a piece of rubber around the fuel lines for added protection.
Thanks guys, Wayne did you use the front or the rear hole?
LowRanger
13th May 2014, 06:34 PM
Thanks guys, Wayne did you use the front or the rear hole?
I guess you mean for the shock mounting......it was on Brendans truck:eek:it would only be used in that position as it is all about articulation.
If I was doing it on a touring vehicle,I would use one of the other positions,depending on load
chook73
13th May 2014, 06:41 PM
I guess you mean for the shock mounting......it was on Brendans truck:eek:it would only be used in that position as it is all about articulation.
If I was doing it on a touring vehicle,I would use one of the other positions,depending on load
Haha yes I was trying to phrase that better but there really was no way.....
Of course it was......
brendanm
13th May 2014, 06:58 PM
If you like Iain I can take a photo in the light tomorrow.
chook73
13th May 2014, 07:19 PM
If you like Iain I can take a photo in the light tomorrow.
Thanks Brendan that would be good just to have a look. I have ordered the filter spacer from Gwyn this evening.
Powered by vBulletin® Version 4.2.4 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.