"Lifty" door handles...tighten up?

[2 rocks]

I know this seems more like the Puma area... :angel::wasntme:

...But can anyone tell me if it's possible to adjust or shim out the lateral play in lift-up type door handles on a County?

The play is across the car rather than up/down. I read on another thread the Series III door handles/locks are different to the County. It's really the front doors that have the issue and I'm not sure if the fact they have locks are a contributing factor in this, or if it's just greater use than the rears.

Cheers for any advice...
Mike

[Dopey]

Land Rover Addict Forums (http://www.landroveraddict.com/forums/thread.cfm'threadID=74737)

Maybe a suggestion in this post may help (putting in thicker or newer door rubbers....)
If as you say, it's lateral movement, maybe new/improved/thicker door rubbers are the answer?

Also, there is a bit of adjustment with the front hinges and the bulkhead, maybe a little adjustment or new hinges might help with door locks? The hinges do wear out and affect the rest of the door open and closing properly.

Regards,
Mike.

[isuzurover]

The slop in the handle is the pin wearing down and/or the hole(s) ovaling out (there may be a bush on the outside...)
http://thumbs4.ebaystatic.com/d/l225/m/mI1MbCK-DLEvgl37AlXrVSw.jpg
https://www.aulro.com/afvb/images/imported/2014/05/452.jpg

Apart from buying a new one, the only option would be to pull it apart and build the worn areas back up with weld and a file/dremel. You can see from the image the inside is just a steel pin in a steel hole.