Safari Snorkel fitting instructions, SS385HF for D3/4

[winaje]

Hi all, has anyone got their fitting instructions available for the D3/4 SS385HF and can scan them, or know of somewhere online where they can be downloaded? I can't find them online anywhere...

[jonesy63]

Translate the following page:

Инструкция к шноркелю SS385HF ― Шноркели.ru - первый всероссийски� �¹ интернет-магазин шноркелей и сопутствующÐ� �Ñ… принадлежнос� �‚ей. (http://shnorkeli.ru/auxpage_ss385hf/)

[Canaussie]

On my iPad can email it to ya if ya pm me

[jonesy63]

I've just sent a copy to Will via email.

[Canaussie]

Ok cheers

[xoph44]

Hi

When I fitted mine 2 out of three templates were a bit incorrect!
It's not difficult to check these on the snorkel pieces and the vehicle before drilling any holes.
Admittedly mine wasn't genuine so it may just have been a dodgy copy?;)

Cheers
Chris

[winaje]

Thanks to Jonesy63 I have a copy of the instructions. With his permission I have uploaded them online, they can be found here: https://app.box.com/d3safarisnorkelinstructions

Thanks

[Whits]

Always pays to but Genuine Parts

[Bytemrk]

Always pays to but Genuine Parts


? :confused: There is no genuine snorkel.... the genuine item is a raised air intake and is not water tight...

While I generally agree with your sentiments... there are times that aftermarket is a better choice for most... I'd say this is one example ... and Bull Bars are another.

LR one is serious fuggly:angel:

[Jonny Fin]

Thanks to Jonesy63 I have a copy of the instructions. With his permission I have uploaded them online, they can be found here: https://app.box.com/d3safarisnorkelinstructions

Thanks


Anyone tried fitting a Safari snorkel to a petrol model D3? I've an '07 SE model and none of the Safari stockists in Perth nor LR themselves know if this will work.


From the little I know the air intake on my model is on the same side (i.e. drivers side) as the TDV6 so I'm hoping, and I know that's asking for a lot..., that it will work on the SE.


Any thoughts appreciated.
Cheers.

[winaje]

Pull the grille off on the right guard, see if there is a pipe in the hole. Check to see if the airbox has the same mating face to the pipe as you see in the instructions. If so I would assume it will fit and work. The body is the same for petrol and diesel engines.

[frazersmate]

Thanks to Jonesy63 I have a copy of the instructions. With his permission I have uploaded them online, they can be found here: https://app.box.com/d3safarisnorkelinstructions

Thanks

Thanks to Jonesy63 for the snorkel instructions and Winaje for asking the question. It s great to get information through the forum.