Nanocom Evo works with USB but not OBD after update

[technophile]

Hi Guys,

i managed to borrow a nonocom evo of a friend. It was working when it was connected to the obd when i got it. I then noticed there was a firmware update (20140603n), so i updated it. Now it will not work when connected to obd. I have checked fuse 8 (ECU) and it is fine. Furthermore, the nanocom works when connected to the pc via a usb.

2006 TD5 Defender

Any thoughts
Thanks

[mools]

No thoughts on that but if you're stuck for a nanocam to use you can use mine (just don't update the firmware).

Ian.

[technophile]

I have also noticed that my clock, interior light and radio are not working, yet the fuses is fine. I checked the radio fuse (number 17) and Fuse number (8) near the gear lever, and the fuse under the driver seat. All looked ok, and i even swapped them out to check.