Two quick ones

[ade]

06 d3.
What is HVAC and does it have anything to do with the yellow suspension faults I keep getting? I can clear the faults with my nanocom or turning the car off but it always comes back. Sometimes it is just a fault. Sometimes it says normal height only. I had the car checked over by my independent after I rebuilt the compressor with a new seal,desiccant and glide ring and they where happy with it but am getting these faults. Thanks

[Mick_Marsh]

HVAC stands for Heating, Ventilation and Air Conditioning.

[sheerluck]

What fault is it that you are getting?

[Graeme]

The suspension fault sounds suspiciously like the compressor is too slow at getting the reservoir up to pressure.

[Redback]

The suspension fault sounds suspiciously like the compressor is too slow at getting the reservoir up to pressure.

X2 what Graeme said, you need to find the fault code and then check what the fault code is for, it also might be a height sensor, the fault code will tell you which one, or if it is the compressor again.

Baz.

[ade]

But how? My nanocom just says there is a fault and then I can clear the ecu's. How do I get it to tell me what the actual fault is. I don't seem to be able to get the full function from it. Have had it for about nine months but but only know how to clear a fault. Instructions where pretty **** poor