D4 Steering column Shroud removal help please

[Bytemrk]

1/2 way through doing my Llams install - all working swimmingly.... connected and tested - works perfectly.

Just tidying up, mounting the reset and control switches and I want to put the controller in my steering column.

I've removed the two torx screws at the front and the casing separates - but something appears to be holding it at the back and I cant see what.

Anyone give me a pointer what I'm missing?.... I dont want to get too brutal and break something. :angel:

[Graeme]

There's a 3rd screw further back on the RHS.

[Bytemrk]

Thank you!!.... obviously need to clean my glasses :angel:

[Graeme]

I'd forgotton how to remove the covers and then had to get a torch to see the screw.

[Bytemrk]

All done and working perfectly!... Thank you :)

[Tombie]

All done and working perfectly!... Thank you :)


No pics; didn't happen :)

[Bytemrk]

No pics; didn't happen :)

Seems I got sidetracked by a mate and beer......no light now.

Will grab some shots tomorrow - very happy with the result.

[Bytemrk]

Here we go Tombie...and others interested :D

I located the Llams controller switch in the steering column...hence this thread.

https://www.aulro.com/afvb/images/imported/2014/07/454.jpg

Now I can be REALLY low for those silly city car parks...

https://www.aulro.com/afvb/images/imported/2014/08/369.jpg
(Lams and car both as low as possible)


or way up high when I need that little extra....

https://www.aulro.com/afvb/images/imported/2014/07/455.jpg
(Lams and car both as high as possible)

And lots of combinations in between.

Far easier than the lift kit I installed to the D2a. :p...and no bleeding knuckles :angel: