Under-tray fixings

[2 rocks]

Hi folks
My partner has just taken delivery of a lovely '04 V6 SE 5dr, however it would appear when it was serviced prior to sale, the PO's mechanic forgot to put the rear two retaining bolts in the under-tray.

Can anyone please tell me what size these are, so I can grab some replacements?

Much obliged :)
Cheers
Mike

[woko]

If its the 2 that have small brackets riveted on they are M6x1, if its the ones in the alloy frame they are M8x1.25

Are you sure its a 04MY. The 04MY was not offered as a V6 in Australia. There were some early 03 V6 but were a 02MY. None of the face lifted ones were V6's in Australia.

[2 rocks]

Thanks mate! I'm off to the hardware tomorrow then...

Yes, rego shows 2004. Interestingly though, it is pre-pocket headlights refresh, yet all the original handbooks and docs from Southern Land Rover are for the final facelift with the new dash/switchgear. So I'm thinking a cross-over model?

Cheers
Mike

[woko]

Check your chassis number. The seventh and eighth number from the end should be a 4A to be a 04 model

Sent from my GT-I9295 using AULRO mobile app

[2 rocks]

Wiki
VIN reads 3A - so assume 2003, delivered '04. But late I guess given the "update" manual/handbooks.
Cheers
Mike