l 322 rear discs and pads

[BRUMMY]

Hello again
Just about to replace the rear discs and pads.
Searched Youtube for a how to do, but only the RR Sport has a video.
Is it any different for the Full fat ?
On the Sport video it mentions that you have to replace the two bolts that hold the caliper in place, it also says you have to replace the clips that hold the shoes in place.
The video I watched was Atlantic British which is a Florida based company, I also watched a British mob but this had less info than the US.
Just want to get a heads up before I pull the the rear end apart.
Cheers Paul

[Homestar]

Straight forward - just like any other vehicle. I always open the bleed nipple before I push the calliper piston in on newer vehicles to avoid damage to the ABS module.

Nothing difficult - I didn't replace anything but the pads - done 40KKM since without issues.

[CBH25]

I watched a great Disco 3 vid on YT also, have a search for D3 if you want some more detail.

It didn't say anything about replacing bolts or clips.

Easy job.