Seat belts for back of GC

[tpoole]

Hi there
has anyone had fitted seat belts to the benches in the back of the GC (ie similar to a troop carrier). I would be interested in looking at some photos and how many belts you can get in. If you could provide photos of underneath the car where the achor points are it would be great.
Thanks Tim

[AdsLandies]

Check out this post;
http://www.aulro.com/afvb/coil-sprung-military-land-rovers/201579-afms-new-toy.html
Need to reinforce under the seat box with extra plates. I've done something similar before and had it engineered. Easy enough to do but would have to be engineered to use legally on the road.
Adam.

[Faceplant]

Here is the best pic I have of the KLR setup in the back. You should check the AFM facebook page and see where they will be showing off their modded version so you can have a close look

https://www.aulro.com/afvb/images/imported/2014/11/307.jpg

[tpoole]

Thanks for both the link and the photos. That is what I am after. Does anyone have a photo of underneath so I can get an idea of what plates are required.

[THE BOOGER]

Not sure about Queensland but in NSW 100 x100 with rounded edges, 1 for each mounting bolt:)

Try here its a doc from qld cut and paste to view it

locost7.info/files/chassis/ADR+Seat+Belt+Mounting+Positions.doc