GOE Suspension rods on a D4 2011

[Silenceisgolden]

Looking at my suspension, the little plastic rods seem to be permanently fixed to the actuator. Is there a kit available to suit a 2011 D4?

[Geedublya]

The kit is for all models. The rods do come off however they are tight and some lube helps a lot.

[Silenceisgolden]

Thanks Geedublya,

Are the rods just a press fit? If so, they seem quite vulnerable.

[Geedublya]

The original rods are very tight and it would be difficult to dislodge. The GOE rods have a lot less surface area and are easier to remove for swapping heights. It would be possible to dislodge one though unusual.

[WhiteD3]

I used them on my 2011 D4. I'd spray the originals before taking them off.

[Silenceisgolden]

Thanks gents, I guess I hadn't wanted to force anything. I will try again.....

[rar110]

Does anyone know if GOE rods fit a FFRR tdv8? TR controls look identical to a D4.

[cripesamighty]

Best to double-check with Gordon (GGHaggis) to see if they are the right length for a FFRR.

[gghaggis]

Does anyone know if GOE rods fit a FFRR tdv8? TR controls look identical to a D4.

They're a different size - I should have some more made up after Christmas. Email me if you need details.

Cheers,

Gordon

[crawal]

Finally got around to fit mine today - a 15 minute job !!!
:D:D:D

[LandyAndy]

My secondhand set came with a can of spray lube,I just learnt why.
Thanks guys.
Andrew