ABS Warning Light

[tommo457]

ABS light keeps coming on when riding over rough terrain bumps etc.only stays on for a moment.
ive been advised to clean brake sensors so can someone advise me where i can look at a diagram/exploded view of brake setup

thanks

[wayneg]

Brake sensors, one on each hub. They just push in, or out.
They should be self adjusting, ie you push them in as far as they will go and the rotation of the exiter ring pushes them out to the correct level.
I would remove, clean and lightly grease before refitting. They do go faulty. The sensor pushes into 7 / 8
https://www.aulro.com/afvb/images/imported/2014/12/664.jpg
https://www.aulro.com/afvb/images/imported/2014/12/665.jpg
http://www.aahmotorsport.com/ekmps/shops/aahmotorsport1/images/range-rover-p38-all-inc-4.6-hse-rear-abs-sensor-stc3385-593-p.jpg

[tommo457]

Fantastic. thanks so much for your help.

cheers

[PhilipA]

Could be a wheel bearing /hub on the way out.
Regards Philip A
Nanocom should tell which one is at fault.

[wayneg]

Or the Accumulator

[tommo457]

nanocom?

[wayneg]

nanocom?

Diagnostics unit.

[SpiggyTopes]

Check the hub nuts too.