connection to rear Nav unit for camera

[Wheelan]

Hi all, I have searched but cannot find, I have the standard Nav touch screen unit in my 2010 D4, can someone tell me what type of connector is the camera input, is it RCA?? or do I need an adaptor, I dont want to find out mid job. I have switched it on with my IIDT and it seems all it needs is a picture/video signal?

[~Rich~]

You need one of these cables:
Nav Screen Cable - SMB to RCA (Phono) - FAKRA compatible - DISCO3.CO.UK - Shop (http://www.disco3.co.uk/shop/nav-screen-cable-smb-to-rca-phono-fakra-compatible-p34.html)

[Wheelan]

You need one of these cables:
Nav Screen Cable - SMB to RCA (Phono) - FAKRA compatible - DISCO3.CO.UK - Shop (http://www.disco3.co.uk/shop/nav-screen-cable-smb-to-rca-phono-fakra-compatible-p34.html)
So is the SMB connector on the lead a female or male?

[cjc_td5]

Check out this thread.

http://www.aulro.com/afvb/d3-d4-rrs/150097-reversing-camera-d4-touch-screen.html

Kenl did a reversing camera install into his MY11 D4 and found a 6 pin plug at the back of the touch screen that had two pins with the camera feed.

Cheers,

[Wheelan]

Check out this thread.

http://www.aulro.com/afvb/d3-d4-rrs/150097-reversing-camera-d4-touch-screen.html

Kenl did a reversing camera install into his MY11 D4 and found a 6 pin plug at the back of the touch screen that had two pins with the camera feed.

Cheers,
I checked that out thanks, does that mean that there is no smb connector for the camera and I think I have the wrong camera going by that, I have a pal cam