Terrafirma Hydraulic Bump Stops

[Lockee]

Hydraulic bump stop kits (http://www.terrafirma4x4store.co.uk/suspension/suspension_kits/hydraulic_bump_stop_kits)

Thinking of a set of these for my new RRC build.

Anyone used them? Feedback

[ramblingboy42]

I have not used them on a vehicle but have used them in many situations in industry.

It would be interesting to know how often one hits the bumpstops.

I know I have on a number of occasions and dont really think hydraulic dampers(bump stops) would have made much difference with the force I have bottommed out each time.

So the rest of the time you don't hit them.

Are you building something serious Lockee.....maybe they have a application.

[Lockee]

All of this driveline is designed to be transferable to anther Rangie donor if need be. Have been scrounging swapping etc for all the bits.

Have just sold my last 4wd in bits.
Was a 93 efi patrol running cage Aerotech seats 315 75 16 Toyo MUDs on alloys. 3 inch Rideppro suspension. Kaymar rear bar and arb lockers 4.6 diffs.

Rangie will be.
1980!2 door
3.5 with 93 efi.
Lt95
Flat bottom diffs
Front 24 spline Tjm pro locker. 4.1 gears
Tjm winch bar with Warn Himount
Rally's 4000s with hid.
Rear diff toyoyot hilux hybrid 4.1 with Tjm pro locker . 30 spline jac mac axles

6 point cage b pillars back.
Unknown rear bar with swc
Prototype Tjm 2.5 Monotube shocks
40mm lift
Hydraulic bump stops
Lra flares and snorkel
Reversed disco wheels 255 85 16 mts

[blackrangie]

Hydraulic bump stop kits (http://www.terrafirma4x4store.co.uk/suspension/suspension_kits/hydraulic_bump_stop_kits)

Thinking of a set of these for my new RRC build.

Anyone used them? Feedback


Any luck with the hydro bump stops?

[Lockee]

Not fitted yet. Have a plan for the front of the LSE though

[blackrangie]

D44 or Terrafirma?
From what i understand if you are running coils the terrafirma is bolt on rear for RRC also, not so for D44

[Lockee]

D44 or Terrafirma?
From what i understand if you are running coils the terrafirma is bolt on rear for RRC also, not so for D44

In the front shocks are in Eas towers going to put threaded bumbstops inside the coils. Rear running extended bump stops from an 80 cruiser inside coils

[blackrangie]

In the front shocks are in Eas towers going to put threaded bumbstops inside the coils. Rear running extended bump stops from an 80 cruiser inside coils


Any reason non using the terrafirma RRC kit for rears, keep us updated, interested on how it turns out

[Lockee]

Build has slowed down a bit but back into it next week.


Yep front hydros should do the trick. Rear secondary rubber bumbstops will be more than enough to slow up travel

[blackrangie]

Build has slowed down a bit but back into it next week.


Yep front hydros should do the trick. Rear secondary rubber bumbstops will be more than enough to slow up travel

Hmm..true but front and rear hydros would be even better :D

[Lockee]

Hmm..true but front and rear hydros would be even better :D
I own two sets but yet to be convinced to put a set in the rear. How's yours going?

[blackrangie]

I own two sets but yet to be convinced to put a set in the rear. How's yours going?

Running airbagman suspension with intelliride but still in testing phase, if it gives me troubles I will leave the konis and add long travel coils and hydro bump stops front and rear (rear spring hangers are lifted to suit bodylift and strengthened)

[Lockee]

Running airbagman suspension with intelliride but still in testing phase, if it gives me troubles I will leave the konis and add long travel coils and hydro bump stops front and rear (rear spring hangers are lifted to suit bodylift and strengthened)


I do have a surplus set of 2.0 Bumpstops 4 inch travel and mounting cans.