HarryO
4th January 2015, 01:41 PM
Finally got tired of looking for places to put extra switches inside my D3 and made this little facia panel which fits 4 switches nicely. I loose half the tray but that's OK - only kept junk in it anyhow. Less space = less junk :)
Had to cut a slot into the plastic frame to get the wires through but the end result looks OK. Hardest part was getting the wires through the bloody bulkhead grommet.
Real handy having the internal winch Arming and Control switches but still having the option of using the outside winch plug (after arming it inside)
The odd switch on the left is just a filler at the moment and will use the same Narva LED switch for my LED lights when I get them.
Had to cut a slot into the plastic frame to get the wires through but the end result looks OK. Hardest part was getting the wires through the bloody bulkhead grommet.
Real handy having the internal winch Arming and Control switches but still having the option of using the outside winch plug (after arming it inside)
The odd switch on the left is just a filler at the moment and will use the same Narva LED switch for my LED lights when I get them.