cup holders?

[incisor]

what are people doing for cup holders on their pre 90's classics?

[pop058]

:p

https://www.aulro.com/afvb/images/imported/2015/02/385.jpg

[Homestar]

When mine had the LT77 in it, I had a little wooden box in front of the centre console that had 3 compartments. The front 2 were cup holders and the rear bit was for my phone/coins/wallet. Now the auto is in there, it doesn't fit and has been moved into the 101 for similar duties.

[incisor]

bodes well then :p

[Mercguy]

I would like a pair of cup holders that fastened to the side of the centre console, near the transfer case shifter....

anyone know of some generic loop type holders which would work ?

[incisor]

a few people have used d2 cup holders but they are pretty exy..

i spotted these when looking around

Stainless Steel Adjustable Foldable Drink CUP Holder Marine Boat Caravan CAR | eBay (http://www.ebay.com.au/itm/230978752012)

[Chucaro]

Ideas from others:

https://www.aulro.com/afvb/images/imported/2015/02/367.jpg

https://www.aulro.com/afvb/images/imported/2015/02/368.jpg

DII cup holders at $53. each (http://www.roverparts.com/sale/R64_Interior.cfm) :eek: ?

https://www.aulro.com/afvb/images/imported/2015/02/369.jpg

[Chucaro]

Inc, the other alternative is to get the Fisher cup holders (http://www.ultimatecupholders.com/fischercupholder.html)

[bikeman]

Hi Inc, I fitted a marine style folding cup holder purchased from Whitworth Marine for about $5.00. This was screwed to the drivers side of the centre consul and folded out when required the closed when not. I have a very bad photo on the 'gauge pod' post. I am having difficulty resending the photo. The cup holder is the dark object on the drivers side of the consul. Cheap, easy to install and works. I hope this helps. Phil

[ramblingboy42]

back in the 70's In Darwin I made a pair of gimble mounted "cup holders"...which were in fact sized to hold a stubby holder.

In the old series I had it was easy to mount them.

but I think with some thought you make something nice in the same manner.

nothing spills in the gimble mount.....and it's good to watch sometimes.

most marine shops supply gimble mounts of varying sizes.

[incisor]

Hi Inc, I fitted a marine style folding cup holder purchased from Whitworth Marine for about $5.00. This was screwed to the drivers side of the centre consul and folded out when required the closed when not. I have a very bad photo on the 'gauge pod' post. I am having difficulty resending the photo. The cup holder is the dark object on the drivers side of the consul. Cheap, easy to install and works. I hope this helps. Phil


i bought two of the stainless ones i linked to above

fitted the drivers side one this arfo and it looks like it will work well once i get a cup that suits

couldnt take a pic as my phone is playing up...

will when i fit the other side hopefully