LED position light set

[Photodude]

91902
Just wanted to see if anyone has brought or used these before. They are a Wipac brand.
Sorry if this has been done before.

[RVR110]

A larger image would be good - I can't see if they are the standard size (73mm) or the NAS size (95mm). Wipac is the primary manufacturer - I haven't seen any other brand. I have the larger size. My advice would be to go for the standard size units as they are a LOT less hassle to install. The larger ones require a plinth and are complete PITA, however I do like the result.

https://www.aulro.com/afvb/images/imported/2015/03/696.jpg

[Photodude]

Yes I remember seeing on your car when we did lithgow together. These are the 73 mm ones.

[BadCo.]

I have them on the Front of my Perentie, they are much better then the OE. Only thing I don't like is that you can see the LEDs.

It would be better if they were frosted or manufactured in a way that you couldn't tell they were LED until you turned them on.

[Dervish]

Yes I remember seeing on your car when we did lithgow together. These are the 73 mm ones.

I had the 73mm ones on the front of mine when we did Jenolan State Forest. I've had them for a few years now and as you'd expect they've been flawless. The standard light fittings filled with water when it rained and dust all the rest of the time, meaning they looked their age and almost lit up brown. The LED fittings - being sealed - still look brand new. Here's a picture (you probably have a few photos of it already? :) )

https://www.aulro.com/afvb/

As Bad says, they look different to the standard units but on a modern Defer like yours I think they'd fit in perfectly. The one thing I didn't like is the difference in colour temperature between these LED park lights and the headlights - one white, one yellow. I've somewhat solved that by using Narva Arctic Plus 50 bulbs.

They're a great thing, I recommend them wholeheartedly.