Log in

View Full Version : Intermittent suspension fault Disco 3 Ritter's Bravo Zulu again



NavyDiver
8th May 2015, 05:06 PM
The very helpful gents at Ritter's had already replaced rear height sensors, cross link valves and much more....
A 800km round trip fishing last weekend saw a suspension error about half way there and half way back. With stop and restart once or several times resolving the problem. The 'Once the several times' took an hour the last time.
Intermittent faults are very annoying and hard to pin down! All errors pointed to the rear of my disco.
Jason played inspector Morse and found a wire harness in the front with a dodgy plug wire. One of the wiring looms where my LLAMS had been hooked in ( not the LLAM wiring)
Sorry if you live to far to get Craig, Jason, Owen and the rest of the crew to help you with your Disco:angel:
Ritter Australia - Home of Land Rover Service, Sales and Parts - Ritter Australia (http://ritter.com.au/)
No chance of naming and shaming infringement here unless it is myself as I plugged the LLAMS system in of course!:twisted: