blackapache
3rd August 2015, 07:57 PM
Hey guys im thinking might be time for a change, but need a little help, I bought the 2000 TD5 defender with about 200,000 on the clock . The PO had put OME springs and shocks in and a damper as well. Im running 33" as well she has a cage on the roof, and i do mostly sand driving.. she does get airborne from time to time :angel:
ive got a fair bit of body roll ( the cage doesnt help) and would like to stiffen up the ride a bit. Im about to do the rear afram joint and all the bushings etc so im thinking i might aim for the shocks too.
Ive always been the one to upgrade the gear in the past and have never bought a used 4x4 with suspension mods already done, so im a bit in the dark about when to replace.
ive not got any leaks or cracks .. if i do the shocks do i need to do the springs as well? whats the expected life of a spring? i know thats like asking how long is a piece of string but some estimates are fine this truck came from out west and with the amount of red dust and mud underneath im assuming it was hitting corrugated roads a bit.
i dont have an arm and leg to spend i just forked out about 2K for everything from MAF, TPS, fuel pump a frame, and bushings so im a bit light for funds so recomending billsteins and all that are probably pipedreams at this point.
any comments greatly appreciated.
ive got a fair bit of body roll ( the cage doesnt help) and would like to stiffen up the ride a bit. Im about to do the rear afram joint and all the bushings etc so im thinking i might aim for the shocks too.
Ive always been the one to upgrade the gear in the past and have never bought a used 4x4 with suspension mods already done, so im a bit in the dark about when to replace.
ive not got any leaks or cracks .. if i do the shocks do i need to do the springs as well? whats the expected life of a spring? i know thats like asking how long is a piece of string but some estimates are fine this truck came from out west and with the amount of red dust and mud underneath im assuming it was hitting corrugated roads a bit.
i dont have an arm and leg to spend i just forked out about 2K for everything from MAF, TPS, fuel pump a frame, and bushings so im a bit light for funds so recomending billsteins and all that are probably pipedreams at this point.
any comments greatly appreciated.