Nanocom Replaced cracked screen

[phil&liz]

Hi,
I have replaced the cracked screen on my Nanocom Evolution and it works, ALMOST.
It seems to require calibration but I can't get to the display page to calibrate it.
I can not access functions that appear in the bottom right area of the screen which includes "next screen" and the "red X"

Can anyone help me http://nanocom.blackbox-solutions.com/components/com_kunena/template/default/images/emoticons/ermm.png

[p38arover]

You might be better to go to the Nanocom forum.

[phil&liz]

You might be better to go to the Nanocom forum.
Have posted in there as well.
Thanks

[phil&liz]

Success
I tried another screen and was able to calibrate it. The 1st screen must have been very different to the one I first used.

[999]

Would you be able to list the screen part numbers for future reference. I have no issues with my first gen evo but if for some unfortunate reason:o the screen needs a replacement it would be handy to have some info.

Also is the digitizer separate from the screen or is it one assembly?

[Sixx]

Success
I tried another screen and was able to calibrate it. The 1st screen must have been very different to the one I first used.
.................................................. ....

Hello Phil&Liz,

Long shot here as the post dates back to 2015 - i need to replace the screen in my nanocom, i know its part number TSA0159 but wondering if you can advise which screen to buy and from where in Australia as you mentioned about calibration issues.
many regards Sixx