Indicator Wiring Piggy Back

[Surrufus]

Hey all,

I plan to install my ARB bull bar tomorrow, and I was looking for a neat way to tap into the wiring for the additional indicators in the bull bar.

Can you get the parts needed to make something like this locally? Or are the Defender plugs/sockets considered to be proprietary?
MUD Piggy Back Wiring Loom - MUD Stuff - Products (http://www.mudstuff.co.uk/products/mud-stuff/mud-piggy-back-wiring-loom.html)

I'm located in Perth WA for the "local" reference.

Thanks :D

[manofaus]

Land Rover Defender NAS Lamp Light Upgrade 2 PIN Connector Plug KIT Wipac RDX | eBay (http://m.ebay.com.au/itm/Land-Rover-Defender-NAS-Lamp-Light-Upgrade-2-Pin-Connector-Plug-Kit-WIPAC-RDX-/141453782873)

Male plug....
Just need the female and crimpers.
Or just go to your local auto elec and see what they stock and splice into standard harness. Have used deutch plugs alot for this as i get them at the right price.

[jimr1]

I agree that those cable scotch locks connectors are very basic . I first used then on an ARB bar many years ago . Only temporary to get them working , and test . The intention was to replace them with a better connector , or even a blob of solder . That never got done , and there still working fine !!.. Jim ..:)

[towe0609]

I have bought those econoseal j series connectors from Rs components if you decide to make your own

http://au.rs-online.com/web/p/automotive-connectors/7122157/

http://au.rs-online.com/web/p/automotive-connector-accessories/6806964/?origin=PSF_435716|acc

http://au.rs-online.com/web/p/automotive-connector-accessories/7199510/

http://au.rs-online.com/web/p/automotive-connector-accessories/7174316/

http://au.rs-online.com/web/p/automotive-connectors/6806977/?origin=PSF_435717|rel

http://au.rs-online.com/web/p/pcb-connector-contacts/6795041/?origin=PSF_435696|acc

http://au.rs-online.com/web/p/automotive-connector-accessories/7121325/?origin=PSF_435716|acc