PDA

View Full Version : Front Runner gas bottle holder measurement ??



rijidij
21st October 2015, 07:45 AM
I'm hoping someone on here has a Front Runner gas bottle holder on their Defender and can help me with a measurement. I want to know whether the holder will be compatible with my dual wheel carrier, so need to know if there's enough clearance.
A measurement from the top of the lower body to the underside of the gas bottle support would be great.
Any help appreciated.

Cheers, Murray

https://www.aulro.com/afvb/images/imported/2015/10/429.jpg (http://s204.photobucket.com/user/rijidij/media/Misc/defender-gas-bottle-holder-_zpsbyeuoutf.jpg.html)

https://www.aulro.com/afvb/images/imported/2015/10/430.jpg (http://s204.photobucket.com/user/rijidij/media/Wheel%20Carriers/Defender%20dual%20rear%20bar/Defender%20Dual%20Rear%20Carrier/Defender-spare-wheel-jerry-.jpg.html)

Marty90
21st October 2015, 12:32 PM
Call Daniel:D

JayBoRover
21st October 2015, 10:11 PM
Seeing as you've used my D90 as the model for the measurement, give me a few minutes and I'll go out and measure it for you. :cool:

Okay, the measurement you have asked for is 31cm. Another point that may be useful is that the rack supports arms, that go up on a slight angle to the gas bottle base, are 6cm out from the body.

fatcat
21st October 2015, 11:12 PM
cant wait to get all my front runner gear in a couple of weeks, i have around 3 grand of gear on the way.


all there gear looks great.

rijidij
22nd October 2015, 10:05 AM
Seeing as you've used my D90 as the model for the measurement, give me a few minutes and I'll go out and measure it for you. :cool:

Okay, the measurement you have asked for is 31cm. Another point that may be useful is that the rack supports arms, that go up on a slight angle to the gas bottle base, are 6cm out from the body.

Thanks John, that should be enough for me to go on. The 6cm wont be a problem, but I need to know whether the tyre will clear the rack.
Thanks for the pic too :D

I just went and measured it up. The rack will easily clear my 33" tyre, so all is good.

Cheers, Murray

KarlB
22nd October 2015, 10:32 AM
The design may have changed a little over time, as the required measurement on mine is 30 cm. The clearance with my 235/85 spare on original mounting is 5 cm.

Cheers
KarlB