PDA

View Full Version : Series 2 chassis number



paulthepilot_5
6th December 2015, 06:48 PM
Hey guys, can anybody give me some details on the following chassis number

25306585b

Apparently an ex-mil chassis.

Cheers Paul

pop058
6th December 2015, 06:53 PM
Have a look at the REMLR site. 253?????b is a LWB mid 60s jigger iirc

paulthepilot_5
21st December 2015, 09:50 PM
So I have been having dramas getting onto the REMLR forum, can't get an account to activate after trying several times. Any other way I can find more detales about this chassis number

Cheers Paul

Mick_Marsh
21st December 2015, 10:48 PM
You don't need to get on the REMLR forum.
Army Registration Lists and Database - REMLR (http://www.remlr.com/index_ARNs.html)
Though it would be nice to see you there.

Mick_Marsh
21st December 2015, 11:00 PM
How odd.
25306584b is ARN 112-993
25306586b is ARN 113-055

Can't find 25306585b

LandroverScott
22nd December 2015, 07:23 AM
Maybe not a military vehicle.

Photo of rear cross member will soon identify it as military or civvi.

Regards

paulthepilot_5
22nd December 2015, 11:39 AM
Ok so I searched the engine number (25174069F), and it matches up with the chassis number 25305685b, have double checked the chassis number and it is 65 not 56. Could this be a typo on the remlr database?. The rear crossmember is a civi one, but I can see it has been replaced.

paulthepilot_5
22nd December 2015, 04:33 PM
Also has a few of the other military 2a features, left and right fuel tanks with selector near hand brake, mechanical oil pressure and water temp gauge. Stripped back the paint on a few places to find the original coat of gloss dark bronze green, on top of that where two shades of the matte army green then the current paint.

LandroverScott
22nd December 2015, 07:11 PM
sounds like a typo on the database,

where is the high beam dipper switch?

regards

paulthepilot_5
22nd December 2015, 07:57 PM
sounds like a typo on the database,

where is the high beam dipper switch?

regards

Dipper is in the civvi position, but it is mounted on a seperate plate riveted to the footwell. Will have to have another look when I go into work, can't recall if there is a mounting point between the clutch and brake that may be covered up

Cheers Paul.

paulthepilot_5
22nd December 2015, 08:04 PM
Are there any other military only features I should be looking for on the chassis, and firewall to help identify? Perhaps there might be some tac plate mount holes bogged up in the rear tub.

Mick_Marsh
22nd December 2015, 08:45 PM
I reckon it is military. All other chassis numbers in that range are there.