PDA

View Full Version : Discovery & Range Rover Diffs



walker
1st September 2005, 05:00 PM
Does anyone know if the Disco2 Diff is the same as the Range Rover Classic Diff? I just have an ARB locker in my Disco and would like to remove it and put it in the front of my '77 Rangie.

I have a maxidrive in the rear which I got 2nd hand but cannot afford to get one for the front. I know I will have to replace the axels with maxidrive 24spline jobbies to fit but this is cheaper than a locker and I probably need maxidrive axels anyway the way i drive.

rangieman
1st September 2005, 08:34 PM
disco has fine spline axles early rangie ha coarse. as far as i know all axles and diffs interchange. front axles on a disco are attached to the cv where as a early rangie both axles are seperate to the cv

walker
1st September 2005, 08:43 PM
Mmmm. So you are saying that the ARB locker in my Disco2 will fit in my Rangie. :? :?

rangieman
2nd September 2005, 12:30 AM
YES it should but you will have to use axles and cv out of disco

walker
2nd September 2005, 08:41 AM
Well I aint going to do that (Disco2 CV's suck) but I will see if maxidrive can make axels to suit.

HSVRangie
2nd September 2005, 10:26 AM
Jac Mac in Melb will make axles to suit.

Michael.

reklaw47
2nd September 2005, 12:00 PM
Thanks Michael. I also spoke to maxi-drive and they make axels to suit as well but it seems that JacMac may be a fair bit cheaper.