PDA

View Full Version : heater/bulkhead seal


mattmac
24th February 2016, 05:44 PM
had to remove the heater to fix a leak in the matrix pipes -anyway the original seal between heater and bulkhead is shot- just got quoted over $50 for new one (STC952) which seems a lot ??? anyone made their own-looks a bit tricky due to the odd shape but could be worth a go.
BadCo.
24th February 2016, 08:29 PM
Maybe have a shop around

https://www.lrdirect.com/STC952-Seal-H1Ter-To-Dash/'sfi=STC952&keep_https=yes
mattmac
24th February 2016, 09:41 PM
Item- AU$ 27.35

Shipping-AU$ 39.30

Remote Area Surcharge-AU$ 27.87

Total For Your Order
AU$ 94.52

Bargain!!!!
BadCo.
25th February 2016, 02:39 AM
Email them for a shipping quote.
Chris078
26th February 2016, 02:47 PM
LR direct have a minimum shipping charge I think. If you need other stuff you could probably add it to the order and it won't increase the shipping charge much/if at all.
BadCo.
26th February 2016, 07:08 PM
Missing the point, that was merely an example. Plenty of other places to try.

Sent from my Nexus 4 using AULRO mobile app