GS tie down points

[Chris078]

Can you buy them anywhere?
Mine are rusted to hell and need replacing. They are an odd shape (holes are 90x50mm) compared to all the ones I'm finding on ebay etc; which seem to be either square, or just out of square.

<edit> clarification; I'm referring to the cargo tie downs in the tray, not the tie downs for the actual truck!

[Aussie Jeepster]

Have you checked the Repair Parts Scale for the part number? You might be able to get them from Land Rover, or at least look up the part number and see what you find.
http://www.remlr.com/documents/RPS/PUBR001%20-%204x4%20Perentie%20Combined%20V1.01.pdf
or look here and download the part you need. under this heading
02188 - 110 GS All Variant Repair Parts Schedule (RPS) -REMLR (http://www.remlr.com/rps.html)

alan

[Chris078]

Yes, I have the part number (HYG 3861) Land rover does not have any in stock here or in the UK (though the price they have is $150 each! So I would not have been buying any anyway at that price)

I may pull a couple out, take them to get blasted and see how deep the rust goes. My suspicion is quite deep and I can't trust them at WLL.

[dranoweb]

Try "landybitzau" on ebay.
I'm finding they have most of what I need there.
Including canvas and some obscure parts.

I'm sure I have tie downs in my watch list...

ahh here they are - known as "body Hooks" - correct terminology.

Land Rover Perentie Series Defender Body Hook X2 | eBay (http://www.ebay.com.au/itm/Land-Rover-Perentie-Series-Defender-Body-Hook-X2-/322003975236?hash=item4af8eebc44)

[dranoweb]

Oh and FYI - the store link:

Landybitz's items - Get great deals on Land Rover Spares, Ex Army Perentie items on eBay Stores! (http://stores.ebay.com.au/landybitzs/)

[Dervish]

I'm sure I have tie downs in my watch list...

ahh here they are - known as "body Hooks" - correct terminology.

Land Rover Perentie Series Defender Body Hook X2 | eBay (http://www.ebay.com.au/itm/Land-Rover-Perentie-Series-Defender-Body-Hook-X2-/322003975236?hash=item4af8eebc44)

I'm pretty sure he's talking about the lashing rings in the floor of the tub.

[Chris078]

I'm pretty sure he's talking about the lashing rings in the floor of the tub.

You are correct.

[dranoweb]

Ahh yes, was looking at those on mine today too while replacing an output shaft seal.

They do look somewhat generic.
These ones (http://www.expeditioncentre.com.au/online-store/touring/storage-solutions/dolium-10mm-heavy-duty-tie-down-lashing-ring.html) are shorter, but I'm pretty sure you could get something that would match the dimensions.

I'll be replacing mine sometime in the future too, so I'll report back here if and when I find something.

[weeds]

UES (Universal Engineering Supplies) should have them......

[archieaja]

You can get a very similar thing (but more heavy duty) from Bunnings in galv steel. Mine were in terrible shape too so I replaced all six with these.

Much better quality than the ones the army used.

Grunt 530kg Galvanised Heavy Duty Recessed Rope Mount | Bunnings Warehouse (http://www.bunnings.com.au/grunt-530kg-galvanised-heavy-duty-recessed-rope-mount_p4310459)

[Chris078]

You can get a very similar thing (but more heavy duty) from Bunnings in galv steel. Mine were in terrible shape too so I replaced all six with these.

Much better quality than the ones the army used.

Grunt 530kg Galvanised Heavy Duty Recessed Rope Mount | Bunnings Warehouse (http://www.bunnings.com.au/grunt-530kg-galvanised-heavy-duty-recessed-rope-mount_p4310459)


You had to drill new holes in the floor to fit these, yes? That's what I'm trying to avoid.

[archieaja]

You would have to drill new holes yes. I replaced my whole rear floor with 4mm check plate so I had to drill new holes either way.

[wpalmo]

An old thread but does anyone know if you are able to source the original sized lash down rings located on the tub floor of the RFSV?

Would like to replace mine otherwise I will try blasting and possible galvanising if there is enough metal left.

Regards Warrick.

[grey_ghost]

An old thread but does anyone know if you are able to source the original sized lash down rings located on the tub floor of the RFSV?

Would like to replace mine otherwise I will try blasting and possible galvanising if there is enough metal left.

Regards Warrick.

Somebody once told me that you can get them at Bunnings.. (You can get the locker keys there - much cheaper than from the LR sellers)…