station wagon fuel filler

[rfurzer]

Where does the fuel filler cutout/surround sit? Ie how far behind the door cutout is the front edge of the filler surround?

There is a stiffener inside the tub behind the door (spot welded in my county donor tub) - does the front rivet line of the fuel surround pick up the stiffener?

[BadCo.]

Where does the fuel filler cutout/surround sit? Ie how far behind the door cutout is the front edge of the filler surround?

There is a stiffener inside the tub behind the door (spot welded in my county donor tub) - does the front rivet line of the fuel surround pick up the stiffener?

I can take pictures tomorrow if you like, just need to remember.

[rar110]

On mine the top middle rivet is 235 mm from the front edge of the tub. I had measurements from someone back when I built it.

106680

[rar110]

Badco would be better taking a measure as it was a factory setup.

I wouldn't use the inside stiffener as a guide. These cars are handmade and can have variations from one vehicle to the next.

[rfurzer]

On mine the top middle rivet is 235 mm from the front edge of the tub. I had measurements from someone back when I built it.

106680

Where does the filler pipe go through the horizontal surface of the wheelarch in comparison with the seat belt anchorage?