PDA

View Full Version : MAF output V8 verses TD5



Mattblack59bus
16th March 2016, 01:38 PM
I've been struggling to find a nominal MAF output value for a V8, it would appear that a TD5 should be 50 at idle (Nanocom values) and close to 500 at heavy load (WOT up a hill).

I'm getting 18-20 at idle and just over 310 WOT up a hill

Has anyone measured the values on a Disco 2 V8 (4.0)?

Cheers
Marc

ozscott
16th March 2016, 01:59 PM
Sorry bud....i am going too fast in my V8 to take a reading.

Cheers

justinc
16th March 2016, 02:27 PM
Yes those values are correct. Jc

sierrafery
16th March 2016, 06:19 PM
Another RAVE inaccuracy then :mad:

Roverlord off road spares
16th March 2016, 06:24 PM
Hi Marc, I get the 18-20 at idle on my V8.
V8's are like elite athletes, their lungs need very little air at rest, and are not oxygen bandits in full performance :p
Cheers, Mario.

Mattblack59bus
16th March 2016, 07:47 PM
I just managed to get 400 exactly going up a hill it dropped back 2 gears, it sounded good :-)

So my MAF values are 20-400

Cheers
Marc

Battler
19th March 2016, 03:18 PM
Check mine (V8) today and it's about 30 (without air on) at idle and 575 WOT. Is that right?

Mattblack59bus
19th March 2016, 04:31 PM
What type of air filter and exhaust do you have?
I wouldn't be to concerned with higher values if the car is running ok.

Battler
20th March 2016, 08:33 AM
Standard filter. SS extrators, single performance muffler. Runs well.
Cheers